Moes ZTS-EU_1gang

Model	ZTS-EU_1gang
Vendor	Moes
Description	Wall touch light switch (1 gang)
Exposes	switch (state), indicate_light, power_on_behavior, linkquality
Picture

Exposes

Switch

The current state of this switch is in the published state under the state property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}. It’s not possible to read (/get) this value.

Indicate_light (enum)

Indicator light status. Value can be found in the published state on the indicate_light property. It’s not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"indicate_light": NEW_VALUE}. The possible values are: off, switch, position, freeze.

Power_on_behavior (enum)

Controls the behavior when the device is powered on. Value can be found in the published state on the power_on_behavior property. It’s not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"power_on_behavior": NEW_VALUE}. The possible values are: off, on, previous.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.