TuYa ZS-TYG3-SM-31Z
| Model | ZS-TYG3-SM-31Z |
| Vendor | TuYa |
| Description | 3 gang smart switch with backlight and neutral wire |
| Exposes | switch (state), backlight_mode, countdown, power_on_behavior, linkquality |
| Picture |  |
Exposes
Switch
The current state of this switch is in the published state under the state property (value is ON or OFF).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}.
It’s not possible to read (/get) this value.
Switch (l1 endpoint)
The current state of this switch is in the published state under the state_l1 property (value is ON or OFF).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_l1": "ON"}, {"state_l1": "OFF"} or {"state_l1": "TOGGLE"}.
It’s not possible to read (/get) this value.
Switch (l2 endpoint)
The current state of this switch is in the published state under the state_l2 property (value is ON or OFF).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_l2": "ON"}, {"state_l2": "OFF"} or {"state_l2": "TOGGLE"}.
It’s not possible to read (/get) this value.
Switch (l3 endpoint)
The current state of this switch is in the published state under the state_l3 property (value is ON or OFF).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_l3": "ON"}, {"state_l3": "OFF"} or {"state_l3": "TOGGLE"}.
It’s not possible to read (/get) this value.
Backlight_mode (binary)
Mode of the backlight.
Value can be found in the published state on the backlight_mode property.
It’s not possible to read (/get) this value.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"backlight_mode": NEW_VALUE}.
If value equals ON backlight_mode is ON, if OFF OFF.
Countdown (numeric, l1 endpoint)
Countdown to turn device off after a certain time.
Value can be found in the published state on the countdown_l1 property.
It’s not possible to read (/get) this value.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"countdown_l1": NEW_VALUE}.
The minimal value is 0 and the maximum value is 43200.
The unit of this value is s.
Countdown (numeric, l2 endpoint)
Countdown to turn device off after a certain time.
Value can be found in the published state on the countdown_l2 property.
It’s not possible to read (/get) this value.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"countdown_l2": NEW_VALUE}.
The minimal value is 0 and the maximum value is 43200.
The unit of this value is s.
Countdown (numeric, l3 endpoint)
Countdown to turn device off after a certain time.
Value can be found in the published state on the countdown_l3 property.
It’s not possible to read (/get) this value.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"countdown_l3": NEW_VALUE}.
The minimal value is 0 and the maximum value is 43200.
The unit of this value is s.
Power_on_behavior (enum)
Controls the behavior when the device is powered on after power loss.
Value can be found in the published state on the power_on_behavior property.
It’s not possible to read (/get) this value.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"power_on_behavior": NEW_VALUE}.
The possible values are: off, on, previous.
Linkquality (numeric)
Link quality (signal strength).
Value can be found in the published state on the linkquality property.
It’s not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 255.
The unit of this value is lqi.