SONOFF ZBMINI

   
Model ZBMINI
Vendor SONOFF
Description Zigbee two way smart switch
Exposes switch (state), linkquality
Picture SONOFF ZBMINI

Notes

Device stuck

In case of switching the coordinators a device may stuck in error state which is indicated by slowly blinking light (about 1 flash per second). To switch a device to a pairing mode power it off for 10 sec. After power on it enters pairing mode automatically.

Options

How to use device type specific configuration

  • state_action: State actions will also be published as ‘action’ when true (default false). The value must be true or false

Exposes

Switch

The current state of this switch is in the published state under the state property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state": ""}.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.