TuYa YXZBSL
| Model | YXZBSL |
| Vendor | TuYa |
| Description | Smart siren |
| Exposes | alarm, type, volume, ringtone, power_type, duration, battery_level, battery, linkquality |
| Picture | ![]() |
Exposes
Alarm (binary)
Turn the light of the alarm ON/OFF.
Value can be found in the published state on the alarm property.
It’s not possible to read (/get) this value.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"alarm": NEW_VALUE}.
If value equals ON alarm is ON, if OFF OFF.
Type (enum)
Alarm type.
Value can be found in the published state on the type property.
It’s not possible to read (/get) this value.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"type": NEW_VALUE}.
The possible values are: sound, light, sound+light, normal.
Volume (enum)
Volume of the alarm.
Value can be found in the published state on the volume property.
It’s not possible to read (/get) this value.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"volume": NEW_VALUE}.
The possible values are: mute, low, medium, high.
Ringtone (enum)
Ringtone of the alarm.
Value can be found in the published state on the ringtone property.
It’s not possible to read (/get) this value.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"ringtone": NEW_VALUE}.
The possible values are: melody1, melody2, melody3, melody4, melody5, melody6, melody7, melody8, door, water, temperature, entered, left.
Power_type (enum)
Power type.
Value can be found in the published state on the power_type property.
It’s not possible to read (/get) or write (/set) this value.
The possible values are: battery, cable.
Duration (numeric)
Duration of the alarm.
Value can be found in the published state on the duration property.
It’s not possible to read (/get) this value.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"duration": NEW_VALUE}.
The minimal value is 1 and the maximum value is 60.
The unit of this value is min.
Battery_level (enum)
Battery level state.
Value can be found in the published state on the battery_level property.
It’s not possible to read (/get) or write (/set) this value.
The possible values are: low, middle, high.
Battery (numeric)
Remaining battery in %, can take up to 24 hours before reported..
Value can be found in the published state on the battery property.
It’s not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 100.
The unit of this value is %.
Linkquality (numeric)
Link quality (signal strength).
Value can be found in the published state on the linkquality property.
It’s not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 255.
The unit of this value is lqi.
