Xiaomi WS-EUK02
Model | WS-EUK02 |
Vendor | Xiaomi |
Description | Aqara smart wall switch H1 EU (no neutral, double rocker) |
Exposes | switch (state), power_outage_memory, flip_indicator_light, led_disabled_night, power_outage_count, device_temperature, operation_mode, mode_switch, action, linkquality |
Picture |
Options
How to use device type specific configuration
-
state_action
: State actions will also be published as ‘action’ when true (default false). The value must betrue
orfalse
-
device_temperature_calibration
: Calibrates the device_temperature value (absolute offset), takes into effect on next report of device. The value must be a number.
Exposes
Switch (left endpoint)
The current state of this switch is in the published state under the state_left
property (value is ON
or OFF
).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"state_left": "ON"}
, {"state_left": "OFF"}
or {"state_left": "TOGGLE"}
.
To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"state_left": ""}
.
Switch (right endpoint)
The current state of this switch is in the published state under the state_right
property (value is ON
or OFF
).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"state_right": "ON"}
, {"state_right": "OFF"}
or {"state_right": "TOGGLE"}
.
To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"state_right": ""}
.
Power_outage_memory (binary)
Enable/disable the power outage memory, this recovers the on/off mode after power failure.
Value can be found in the published state on the power_outage_memory
property.
To read (/get
) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"power_outage_memory": ""}
.
To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"power_outage_memory": NEW_VALUE}
.
If value equals true
power_outage_memory is ON, if false
OFF.
Flip_indicator_light (binary)
After turn on, the indicator light turns on while switch is off, and vice versa.
Value can be found in the published state on the flip_indicator_light
property.
To read (/get
) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"flip_indicator_light": ""}
.
To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"flip_indicator_light": NEW_VALUE}
.
If value equals ON
flip_indicator_light is ON, if OFF
OFF.
Led_disabled_night (binary)
Enable/disable the LED at night.
Value can be found in the published state on the led_disabled_night
property.
To read (/get
) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"led_disabled_night": ""}
.
To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"led_disabled_night": NEW_VALUE}
.
If value equals true
led_disabled_night is ON, if false
OFF.
Power_outage_count (numeric)
Number of power outages (since last pairing).
Value can be found in the published state on the power_outage_count
property.
It’s not possible to read (/get
) or write (/set
) this value.
Device_temperature (numeric)
Temperature of the device.
Value can be found in the published state on the device_temperature
property.
It’s not possible to read (/get
) or write (/set
) this value.
The unit of this value is °C
.
Operation_mode (enum, left endpoint)
Decoupled mode for left button.
Value can be found in the published state on the operation_mode_left
property.
To read (/get
) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"operation_mode_left": ""}
.
To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"operation_mode_left": NEW_VALUE}
.
The possible values are: control_relay
, decoupled
.
Operation_mode (enum, right endpoint)
Decoupled mode for right button.
Value can be found in the published state on the operation_mode_right
property.
To read (/get
) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"operation_mode_right": ""}
.
To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"operation_mode_right": NEW_VALUE}
.
The possible values are: control_relay
, decoupled
.
Mode_switch (enum)
Anti flicker mode can be used to solve blinking issues of some lights.Quick mode makes the device respond faster..
Value can be found in the published state on the mode_switch
property.
To read (/get
) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"mode_switch": ""}
.
To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"mode_switch": NEW_VALUE}
.
The possible values are: anti_flicker_mode
, quick_mode
.
Action (enum)
Triggered action (e.g. a button click).
Value can be found in the published state on the action
property.
It’s not possible to read (/get
) or write (/set
) this value.
The possible values are: single_left
, double_left
, single_right
, double_right
, single_both
, double_both
.
Linkquality (numeric)
Link quality (signal strength).
Value can be found in the published state on the linkquality
property.
It’s not possible to read (/get
) or write (/set
) this value.
The minimal value is 0
and the maximum value is 255
.
The unit of this value is lqi
.