TuYa TS0601_thermostat_1

   
Model TS0601_thermostat_1
Vendor TuYa
Description Thermostatic radiator valve
Exposes battery, lock (state), max_temperature, min_temperature, position, switch (state), window, alarm_switch, climate (local_temperature, current_heating_setpoint, local_temperature_calibration, preset, system_mode, running_state), schedule_monday, schedule_tuesday, schedule_wednesday, schedule_thursday, schedule_friday, schedule_saturday, schedule_sunday, boost_heating, boost_time, linkquality
Picture TuYa TS0601_thermostat_1
White-label Unknown/id3.pl GTZ06

Exposes

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported.. Value can be found in the published state on the battery property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Lock

The current state of this lock is in the published state under the child_lock property (value is LOCK or UNLOCK). To control this lock publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"child_lock": "LOCK"} or {"child_lock": "UNLOCK"}. It’s not possible to read (/get) this value.

Max_temperature (numeric)

Maximum temperature. Value can be found in the published state on the max_temperature property. It’s not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"max_temperature": NEW_VALUE}. The minimal value is 15 and the maximum value is 35. The unit of this value is °C.

Min_temperature (numeric)

Minimum temperature. Value can be found in the published state on the min_temperature property. It’s not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"min_temperature": NEW_VALUE}. The minimal value is 1 and the maximum value is 15. The unit of this value is °C.

Position (numeric)

Position. Value can be found in the published state on the position property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is %.

Switch

The current state of this switch is in the published state under the window_detection property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"window_detection": "ON"}, {"window_detection": "OFF"} or {"window_detection": "TOGGLE"}. It’s not possible to read (/get) this value.

Window (binary)

Window status closed or open . Value can be found in the published state on the window property. It’s not possible to read (/get) or write (/set) this value. If value equals CLOSED window is ON, if OPEN OFF.

Alarm_switch (binary)

Thermostat in error state. Value can be found in the published state on the alarm_switch property. It’s not possible to read (/get) or write (/set) this value. If value equals ON alarm_switch is ON, if OFF OFF.

Climate

This climate device supports the following features: local_temperature, current_heating_setpoint, local_temperature_calibration, preset, system_mode, running_state.

  • current_heating_setpoint: Temperature setpoint. To control publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"current_heating_setpoint": VALUE} where VALUE is the °C between 5 and 35. Reading (/get) this attribute is not possible.
  • local_temperature: Current temperature measured on the device (in °C). Reading (/get) this attribute is not possible.
  • preset: MANUAL MODE ☝ - In this mode, the device executes manual temperature setting. When the set temperature is lower than the “minimum temperature”, the valve is closed (forced closed). AUTO MODE ⏱ - In this mode, the device executes a preset week programming temperature time and temperature. ON - In this mode, the thermostat stays open OFF - In this mode, the thermostat stays closed. To control publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"preset": VALUE} where VALUE is one of: auto, manual, off, on. Reading (/get) this attribute is not possible.
  • system_mode: Mode of this device. To control publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"system_mode": VALUE} where VALUE is one of: auto, heat, off. Reading (/get) this attribute is not possible.
  • running_state: The current running state. Possible values are: idle, heat. Reading (/get) this attribute is not possible.
  • local_temperature_calibration: Offset to be used in the local_temperature. To control publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"local_temperature_calibration": VALUE}.The minimal value is -30 and the maximum value is 30 with a step size of 0.1.

Schedule_monday (text)

Schedule for monday, format: “HH:MM/C HH:MM/C HH:MM/C HH:MM/C”. Value can be found in the published state on the schedule_monday property. It’s not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"schedule_monday": NEW_VALUE}.

Schedule_tuesday (text)

Schedule for tuesday, format: “HH:MM/C HH:MM/C HH:MM/C HH:MM/C”. Value can be found in the published state on the schedule_tuesday property. It’s not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"schedule_tuesday": NEW_VALUE}.

Schedule_wednesday (text)

Schedule for wednesday, format: “HH:MM/C HH:MM/C HH:MM/C HH:MM/C”. Value can be found in the published state on the schedule_wednesday property. It’s not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"schedule_wednesday": NEW_VALUE}.

Schedule_thursday (text)

Schedule for thursday, format: “HH:MM/C HH:MM/C HH:MM/C HH:MM/C”. Value can be found in the published state on the schedule_thursday property. It’s not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"schedule_thursday": NEW_VALUE}.

Schedule_friday (text)

Schedule for friday, format: “HH:MM/C HH:MM/C HH:MM/C HH:MM/C”. Value can be found in the published state on the schedule_friday property. It’s not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"schedule_friday": NEW_VALUE}.

Schedule_saturday (text)

Schedule for saturday, format: “HH:MM/C HH:MM/C HH:MM/C HH:MM/C”. Value can be found in the published state on the schedule_saturday property. It’s not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"schedule_saturday": NEW_VALUE}.

Schedule_sunday (text)

Schedule for sunday, format: “HH:MM/C HH:MM/C HH:MM/C HH:MM/C”. Value can be found in the published state on the schedule_sunday property. It’s not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"schedule_sunday": NEW_VALUE}.

Boost_heating (binary)

Boost Heating: press and hold “+” for 3 seconds, the device will enter the boost heating mode, and the ▷╵◁ will flash. The countdown will be displayed in the APP. Value can be found in the published state on the boost_heating property. It’s not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"boost_heating": NEW_VALUE}. If value equals ON boost_heating is ON, if OFF OFF.

Boost_time (numeric)

Countdown in minutes. Value can be found in the published state on the boost_time property. It’s not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"boost_time": NEW_VALUE}. The minimal value is 0 and the maximum value is 1000. The unit of this value is min.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.