TuYa TS0601_cover_3
| Model | TS0601_cover_3 |
| Vendor | TuYa |
| Description | Cover motor |
| Exposes | battery, cover (state, position), reverse_direction, border, click_control, motor_fault, linkquality |
| Picture |  |
| White-label | Zemismart ZM16EL-03/33 |
Options
How to use device type specific configuration
invert_cover: Inverts the cover position, false: open=100,close=0, true: open=0,close=100 (default false). The value must betrueorfalse
Exposes
Battery (numeric)
Remaining battery in %, can take up to 24 hours before reported..
Value can be found in the published state on the battery property.
It’s not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 100.
The unit of this value is %.
Cover
The current state of this cover is in the published state under the state property (value is OPEN or CLOSE).
To control this cover publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "OPEN"}, {"state": "CLOSE"}, {"state": "STOP"}.
It’s not possible to read (/get) this value.
To change the position publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"position": VALUE} where VALUE is a number between 0 and 100.
Reverse_direction (enum)
Reverse the motor direction.
Value can be found in the published state on the reverse_direction property.
It’s not possible to read (/get) this value.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"reverse_direction": NEW_VALUE}.
The possible values are: forward, back.
Border (enum)
Value can be found in the published state on the border property.
It’s not possible to read (/get) this value.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"border": NEW_VALUE}.
The possible values are: up, down, up_delete, down_delete, remove_top_bottom.
Click_control (enum)
Single motor steps.
Value can be found in the published state on the click_control property.
It’s not possible to read (/get) this value.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"click_control": NEW_VALUE}.
The possible values are: up, down.
Motor_fault (binary)
Value can be found in the published state on the motor_fault property.
It’s not possible to read (/get) or write (/set) this value.
If value equals true motor_fault is ON, if false OFF.
Linkquality (numeric)
Link quality (signal strength).
Value can be found in the published state on the linkquality property.
It’s not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 255.
The unit of this value is lqi.