TuYa TS0601_3_phase_clamp_meter_relay

   
Model TS0601_3_phase_clamp_meter_relay
Vendor TuYa
Description 3-phase clamp power meter with relay
Exposes switch (state), power, energy, produced_energy, voltage_a, voltage_b, voltage_c, power_a, power_b, power_c, current_a, current_b, current_c, linkquality
Picture TuYa TS0601_3_phase_clamp_meter_relay
White-label Wenzhou Taiye Electric TAC7361C BI

Options

How to use device type specific configuration

  • energy_precision: Number of digits after decimal point for energy, takes into effect on next report of device. The value must be a number with a minimum value of 0 and with a with a maximum value of 3

  • energy_calibration: Calibrates the energy value (percentual offset), takes into effect on next report of device. The value must be a number.

  • power_precision: Number of digits after decimal point for power, takes into effect on next report of device. The value must be a number with a minimum value of 0 and with a with a maximum value of 3

  • power_calibration: Calibrates the power value (percentual offset), takes into effect on next report of device. The value must be a number.

Exposes

Switch

The current state of this switch is in the published state under the state property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}. It’s not possible to read (/get) this value.

Power (numeric)

Instantaneous measured power. Value can be found in the published state on the power property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is W.

Energy (numeric)

Sum of consumed energy. Value can be found in the published state on the energy property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is kWh.

Produced_energy (numeric)

Sum of produced energy. Value can be found in the published state on the produced_energy property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is kWh.

Voltage_a (numeric)

Measured electrical potential value (phase A). Value can be found in the published state on the voltage_a property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is V.

Voltage_b (numeric)

Measured electrical potential value (phase B). Value can be found in the published state on the voltage_b property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is V.

Voltage_c (numeric)

Measured electrical potential value (phase C). Value can be found in the published state on the voltage_c property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is V.

Power_a (numeric)

Instantaneous measured power (phase A). Value can be found in the published state on the power_a property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is W.

Power_b (numeric)

Instantaneous measured power (phase B). Value can be found in the published state on the power_b property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is W.

Power_c (numeric)

Instantaneous measured power (phase C). Value can be found in the published state on the power_c property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is W.

Current_a (numeric)

Instantaneous measured electrical current (phase A). Value can be found in the published state on the current_a property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is A.

Current_b (numeric)

Instantaneous measured electrical current (phase B). Value can be found in the published state on the current_b property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is A.

Current_c (numeric)

Instantaneous measured electrical current (phase C). Value can be found in the published state on the current_c property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is A.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.