TuYa TS0205

Model	TS0205
Vendor	TuYa
Description	Smoke sensor
Exposes	smoke, battery_low, tamper, battery, linkquality
Picture
White-label	Tesla Smart TSL-SEN-SMOKE

Notes

Pairing

Press the button about 5 seconds untill the light changes from red to green. Release the button (it should biep twice now). Green light starts flashing. Press again one time.

Exposes

Smoke (binary)

Indicates whether the device detected smoke. Value can be found in the published state on the smoke property. It’s not possible to read (/get) or write (/set) this value. If value equals true smoke is ON, if false OFF.

Battery_low (binary)

Indicates if the battery of this device is almost empty. Value can be found in the published state on the battery_low property. It’s not possible to read (/get) or write (/set) this value. If value equals true battery_low is ON, if false OFF.

Tamper (binary)

Indicates whether the device is tampered. Value can be found in the published state on the tamper property. It’s not possible to read (/get) or write (/set) this value. If value equals true tamper is ON, if false OFF.

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported.. Value can be found in the published state on the battery property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.