TuYa TS0013
| Model | TS0013 |
| Vendor | TuYa |
| Description | Smart light switch - 3 gang without neutral wire |
| Exposes | switch (state), power_on_behavior, backlight_mode, linkquality |
| Picture |  |
| White-label | TUYATEC GDKES-03TZXD |
Notes
This device does not act as a Zigbee router, even when the optional neutral connection is used.
Rebrand
Also branded as Yagusmart in the UK, with a version that does not require a neutral wire.
Options
How to use device type specific configuration
state_action: State actions will also be published as ‘action’ when true (default false). The value must betrueorfalse
Exposes
Switch (left endpoint)
The current state of this switch is in the published state under the state_left property (value is ON or OFF).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_left": "ON"}, {"state_left": "OFF"} or {"state_left": "TOGGLE"}.
To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state_left": ""}.
Switch (center endpoint)
The current state of this switch is in the published state under the state_center property (value is ON or OFF).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_center": "ON"}, {"state_center": "OFF"} or {"state_center": "TOGGLE"}.
To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state_center": ""}.
Switch (right endpoint)
The current state of this switch is in the published state under the state_right property (value is ON or OFF).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_right": "ON"}, {"state_right": "OFF"} or {"state_right": "TOGGLE"}.
To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state_right": ""}.
Power_on_behavior (enum)
Controls the behavior when the device is powered on after power loss.
Value can be found in the published state on the power_on_behavior property.
To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"power_on_behavior": ""}.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"power_on_behavior": NEW_VALUE}.
The possible values are: off, previous, on.
Backlight_mode (enum)
Intensity of the backlight.
Value can be found in the published state on the backlight_mode property.
To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"backlight_mode": ""}.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"backlight_mode": NEW_VALUE}.
The possible values are: low, medium, high.
Linkquality (numeric)
Link quality (signal strength).
Value can be found in the published state on the linkquality property.
It’s not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 255.
The unit of this value is lqi.