Sinopé SW2500ZB

   
Model SW2500ZB
Vendor Sinopé
Description Zigbee smart light switch
Exposes switch (state), action, timer_seconds, led_intensity_on, led_intensity_off, led_color_on, led_color_off, keypad_lockout, connected_load, energy, linkquality
Picture Sinopé SW2500ZB

Options

How to use device type specific configuration

  • state_action: State actions will also be published as ‘action’ when true (default false). The value must be true or false

  • energy_precision: Number of digits after decimal point for energy, takes into effect on next report of device. The value must be a number with a minimum value of 0 and with a with a maximum value of 3

  • energy_calibration: Calibrates the energy value (percentual offset), takes into effect on next report of device. The value must be a number.

Exposes

Switch

The current state of this switch is in the published state under the state property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state": ""}.

Action (enum)

Triggered action (e.g. a button click). Value can be found in the published state on the action property. It’s not possible to read (/get) or write (/set) this value. The possible values are: up_single, up_double, up_hold, down_single, down_double, down_hold.

Timer_seconds (numeric)

Automatically turn off load after x seconds. Value can be found in the published state on the timer_seconds property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"timer_seconds": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"timer_seconds": NEW_VALUE}. The minimal value is 0 and the maximum value is 65535. The unit of this value is seconds. Besides the numeric values the following values are accepected: Disabled.

Led_intensity_on (numeric)

Control status LED intensity when load ON. Value can be found in the published state on the led_intensity_on property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"led_intensity_on": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"led_intensity_on": NEW_VALUE}. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Led_intensity_off (numeric)

Control status LED intensity when load OFF. Value can be found in the published state on the led_intensity_off property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"led_intensity_off": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"led_intensity_off": NEW_VALUE}. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Led_color_on (composite)

Control status LED color when load ON. Can be set by publishing to zigbee2mqtt/FRIENDLY_NAME/set with payload {"led_color_on": {"r": VALUE, "g": VALUE, "b": VALUE}}

  • r (numeric)
  • g (numeric)
  • b (numeric)

Led_color_off (composite)

Control status LED color when load OFF. Can be set by publishing to zigbee2mqtt/FRIENDLY_NAME/set with payload {"led_color_off": {"r": VALUE, "g": VALUE, "b": VALUE}}

  • r (numeric)
  • g (numeric)
  • b (numeric)

Keypad_lockout (enum)

Enables or disables the device’s buttons. Value can be found in the published state on the keypad_lockout property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"keypad_lockout": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"keypad_lockout": NEW_VALUE}. The possible values are: unlock, lock.

Connected_load (numeric)

Load connected in watt. Value can be found in the published state on the connected_load property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"connected_load": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"connected_load": NEW_VALUE}. The minimal value is 0 and the maximum value is 1800. The unit of this value is W.

Energy (numeric)

Sum of consumed energy. Value can be found in the published state on the energy property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is kWh.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.