ROBB ROB_200-025-0

   
Model ROB_200-025-0
Vendor ROBB
Description Zigbee 8 button wall switch
Exposes battery, action, linkquality
Picture ROBB ROB_200-025-0

Options

How to use device type specific configuration

  • simulated_brightness: Simulate a brightness value. If this device provides a brightness_move_up or brightness_move_down action it is possible to specify the update interval and delta. The action_brightness_delta indicates the delta for each interval. Example:
    simulated_brightness:
    delta: 20 # delta per interval, default = 20
    interval: 200 # interval in milliseconds, default = 200
    

Exposes

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported.. Value can be found in the published state on the battery property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Action (enum)

Triggered action (e.g. a button click). Value can be found in the published state on the action property. It’s not possible to read (/get) or write (/set) this value. The possible values are: on_1, off_1, brightness_move_up_1, brightness_move_down_1, brightness_stop_1, on_2, off_2, brightness_move_up_2, brightness_move_down_2, brightness_stop_2, on_3, off_3, brightness_move_up_3, brightness_move_down_3, brightness_stop_3, on_4, off_4, brightness_move_up_4, brightness_move_down_4, brightness_stop_4.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.