Xiaomi QBKG40LM
| Model | QBKG40LM |
| Vendor | Xiaomi |
| Description | Aqara E1 1 gang switch (with neutral) |
| Exposes | switch (state), action, power_outage_memory, device_temperature, flip_indicator_light, operation_mode, linkquality |
| Picture |  |
Notes
Adapter firmware
In order for this device to work (fully), at least the following firmware is required on your adapter:
- CC2530/CC2531:
20211115 - CC1352/CC2652:
20211114 - CC2538:
20211222 - Conbee II:
0x26720700
Note that if you have already paired the device you will need to repair it after upgrading your adapter firmware.
OTA updates
This device supports OTA updates, for more information see OTA updates.
Options
How to use device type specific configuration
-
state_action: State actions will also be published as ‘action’ when true (default false). The value must betrueorfalse -
device_temperature_calibration: Calibrates the device_temperature value (absolute offset), takes into effect on next report of device. The value must be a number.
Exposes
Switch
The current state of this switch is in the published state under the state property (value is ON or OFF).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}.
To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state": ""}.
Action (enum)
Triggered action (e.g. a button click).
Value can be found in the published state on the action property.
It’s not possible to read (/get) or write (/set) this value.
The possible values are: single, double.
Power_outage_memory (binary)
Enable/disable the power outage memory, this recovers the on/off mode after power failure.
Value can be found in the published state on the power_outage_memory property.
To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"power_outage_memory": ""}.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"power_outage_memory": NEW_VALUE}.
If value equals true power_outage_memory is ON, if false OFF.
Device_temperature (numeric)
Temperature of the device.
Value can be found in the published state on the device_temperature property.
It’s not possible to read (/get) or write (/set) this value.
The unit of this value is °C.
Flip_indicator_light (binary)
After turn on, the indicator light turns on while switch is off, and vice versa.
Value can be found in the published state on the flip_indicator_light property.
To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"flip_indicator_light": ""}.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"flip_indicator_light": NEW_VALUE}.
If value equals ON flip_indicator_light is ON, if OFF OFF.
Operation_mode (enum)
Decoupled mode.
Value can be found in the published state on the operation_mode property.
To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"operation_mode": ""}.
To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"operation_mode": NEW_VALUE}.
The possible values are: control_relay, decoupled.
Linkquality (numeric)
Link quality (signal strength).
Value can be found in the published state on the linkquality property.
It’s not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 255.
The unit of this value is lqi.