Lidl PSBZS A1

   
Model PSBZS A1
Vendor Lidl
Description Parkside smart watering timer
Exposes battery, switch (state), timer, time_left, frost_lock, reset_frost_lock, schedule_mode, schedule_periodic, schedule_weekday, schedule_slot_1, schedule_slot_2, schedule_slot_3, schedule_slot_4, schedule_slot_5, schedule_slot_6, linkquality
Picture Lidl PSBZS A1

Exposes

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported.. Value can be found in the published state on the battery property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Switch

The current state of this switch is in the published state under the state property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}. It’s not possible to read (/get) this value.

Timer (numeric)

Auto off after specific time for manual watering.. Value can be found in the published state on the timer property. It’s not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"timer": NEW_VALUE}. The minimal value is 1 and the maximum value is 599. The unit of this value is min.

Time_left (numeric)

Remaining time until the watering turns off.. Value can be found in the published state on the time_left property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is min.

Frost_lock (binary)

Indicates if the frost guard is currently active. If the temperature drops below 5° C, device activates frost guard and disables irrigation. You need to reset the frost guard to activate irrigation again. Note: There is no way to enable frost guard manually.. Value can be found in the published state on the frost_lock property. It’s not possible to read (/get) or write (/set) this value. If value equals ON frost_lock is ON, if OFF OFF.

Reset_frost_lock (enum)

Resets frost lock to make the device workable again.. Value will not be published in the state. It’s not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"reset_frost_lock": NEW_VALUE}. The possible values are: RESET.

Schedule_mode (enum)

Scheduling mode that is currently in use.. Value can be found in the published state on the schedule_mode property. It’s not possible to read (/get) or write (/set) this value. The possible values are: OFF, WEEKDAY, PERIODIC.

Schedule_periodic (numeric)

Watering by periodic interval: Irrigate every n days. Value can be found in the published state on the schedule_periodic property. It’s not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"schedule_periodic": NEW_VALUE}. The minimal value is 0 and the maximum value is 7. The unit of this value is day.

Schedule_weekday (composite)

Watering by weekday: Irrigate individually for each day.. Can be set by publishing to zigbee2mqtt/FRIENDLY_NAME/set with payload {"schedule_weekday": {"monday": VALUE, "tuesday": VALUE, "wednesday": VALUE, "thursday": VALUE, "friday": VALUE, "saturday": VALUE, "sunday": VALUE}}

  • monday (binary) allowed values: ON or OFF
  • tuesday (binary) allowed values: ON or OFF
  • wednesday (binary) allowed values: ON or OFF
  • thursday (binary) allowed values: ON or OFF
  • friday (binary) allowed values: ON or OFF
  • saturday (binary) allowed values: ON or OFF
  • sunday (binary) allowed values: ON or OFF

Schedule_slot_1 (composite)

Watering time slot 1. Can be set by publishing to zigbee2mqtt/FRIENDLY_NAME/set with payload {"schedule_slot_1": {"state": VALUE, "start_hour": VALUE, "start_minute": VALUE, "timer": VALUE, "pause": VALUE, "iterations": VALUE}}

  • state (binary): On/off state of the time slot allowed values: ON or OFF
  • start_hour (numeric): Starting time (hour) max value is 23, unit is h
  • start_minute (numeric): Starting time (minute) max value is 59, unit is min
  • timer (numeric): Auto off after specific time for scheduled watering. min value is 1, max value is 599, unit is min
  • pause (numeric): Pause after each iteration. max value is 599, unit is min
  • iterations (numeric): Number of watering iterations. Works only if there is a pause. min value is 1, max value is 9

Schedule_slot_2 (composite)

Watering time slot 2. Can be set by publishing to zigbee2mqtt/FRIENDLY_NAME/set with payload {"schedule_slot_2": {"state": VALUE, "start_hour": VALUE, "start_minute": VALUE, "timer": VALUE, "pause": VALUE, "iterations": VALUE}}

  • state (binary): On/off state of the time slot allowed values: ON or OFF
  • start_hour (numeric): Starting time (hour) max value is 23, unit is h
  • start_minute (numeric): Starting time (minute) max value is 59, unit is min
  • timer (numeric): Auto off after specific time for scheduled watering. min value is 1, max value is 599, unit is min
  • pause (numeric): Pause after each iteration. max value is 599, unit is min
  • iterations (numeric): Number of watering iterations. Works only if there is a pause. min value is 1, max value is 9

Schedule_slot_3 (composite)

Watering time slot 3. Can be set by publishing to zigbee2mqtt/FRIENDLY_NAME/set with payload {"schedule_slot_3": {"state": VALUE, "start_hour": VALUE, "start_minute": VALUE, "timer": VALUE, "pause": VALUE, "iterations": VALUE}}

  • state (binary): On/off state of the time slot allowed values: ON or OFF
  • start_hour (numeric): Starting time (hour) max value is 23, unit is h
  • start_minute (numeric): Starting time (minute) max value is 59, unit is min
  • timer (numeric): Auto off after specific time for scheduled watering. min value is 1, max value is 599, unit is min
  • pause (numeric): Pause after each iteration. max value is 599, unit is min
  • iterations (numeric): Number of watering iterations. Works only if there is a pause. min value is 1, max value is 9

Schedule_slot_4 (composite)

Watering time slot 4. Can be set by publishing to zigbee2mqtt/FRIENDLY_NAME/set with payload {"schedule_slot_4": {"state": VALUE, "start_hour": VALUE, "start_minute": VALUE, "timer": VALUE, "pause": VALUE, "iterations": VALUE}}

  • state (binary): On/off state of the time slot allowed values: ON or OFF
  • start_hour (numeric): Starting time (hour) max value is 23, unit is h
  • start_minute (numeric): Starting time (minute) max value is 59, unit is min
  • timer (numeric): Auto off after specific time for scheduled watering. min value is 1, max value is 599, unit is min
  • pause (numeric): Pause after each iteration. max value is 599, unit is min
  • iterations (numeric): Number of watering iterations. Works only if there is a pause. min value is 1, max value is 9

Schedule_slot_5 (composite)

Watering time slot 5. Can be set by publishing to zigbee2mqtt/FRIENDLY_NAME/set with payload {"schedule_slot_5": {"state": VALUE, "start_hour": VALUE, "start_minute": VALUE, "timer": VALUE, "pause": VALUE, "iterations": VALUE}}

  • state (binary): On/off state of the time slot allowed values: ON or OFF
  • start_hour (numeric): Starting time (hour) max value is 23, unit is h
  • start_minute (numeric): Starting time (minute) max value is 59, unit is min
  • timer (numeric): Auto off after specific time for scheduled watering. min value is 1, max value is 599, unit is min
  • pause (numeric): Pause after each iteration. max value is 599, unit is min
  • iterations (numeric): Number of watering iterations. Works only if there is a pause. min value is 1, max value is 9

Schedule_slot_6 (composite)

Watering time slot 6. Can be set by publishing to zigbee2mqtt/FRIENDLY_NAME/set with payload {"schedule_slot_6": {"state": VALUE, "start_hour": VALUE, "start_minute": VALUE, "timer": VALUE, "pause": VALUE, "iterations": VALUE}}

  • state (binary): On/off state of the time slot allowed values: ON or OFF
  • start_hour (numeric): Starting time (hour) max value is 23, unit is h
  • start_minute (numeric): Starting time (minute) max value is 59, unit is min
  • timer (numeric): Auto off after specific time for scheduled watering. min value is 1, max value is 599, unit is min
  • pause (numeric): Pause after each iteration. max value is 599, unit is min
  • iterations (numeric): Number of watering iterations. Works only if there is a pause. min value is 1, max value is 9

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.