Xiaomi MCCGQ13LM

Model	MCCGQ13LM
Vendor	Xiaomi
Description	Aqara P1 door & window contact sensor
Exposes	contact, battery, voltage, battery_cover, detection_distance, linkquality
Picture

Exposes

Contact (binary)

Indicates if the contact is closed (= true) or open (= false). Value can be found in the published state on the contact property. It’s not possible to read (/get) or write (/set) this value. If value equals false contact is ON, if true OFF.

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported.. Value can be found in the published state on the battery property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Voltage (numeric)

Voltage of the battery in millivolts. Value can be found in the published state on the voltage property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is mV.

Battery_cover (binary)

Value can be found in the published state on the battery_cover property. It’s not possible to read (/get) or write (/set) this value. If value equals OPEN battery_cover is ON, if CLOSE OFF.

Detection_distance (enum)

The sensor will be considered “off” within the set distance. Please press the device button before setting. Value can be found in the published state on the detection_distance property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"detection_distance": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"detection_distance": NEW_VALUE}. The possible values are: 10mm, 20mm, 30mm.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.