HEIMAN HS2SW3A/HS2SW3A-N
| Model | HS2SW3A/HS2SW3A-N |
| Vendor | HEIMAN |
| Description | Smart switch - 3 gang with neutral wire |
| Exposes | switch (state), device_temperature, linkquality |
| Picture |  |
Options
How to use device type specific configuration
-
state_action: State actions will also be published as ‘action’ when true (default false). The value must betrueorfalse -
device_temperature_calibration: Calibrates the device_temperature value (absolute offset), takes into effect on next report of device. The value must be a number.
Exposes
Switch (left endpoint)
The current state of this switch is in the published state under the state_left property (value is ON or OFF).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_left": "ON"}, {"state_left": "OFF"} or {"state_left": "TOGGLE"}.
To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state_left": ""}.
Switch (center endpoint)
The current state of this switch is in the published state under the state_center property (value is ON or OFF).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_center": "ON"}, {"state_center": "OFF"} or {"state_center": "TOGGLE"}.
To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state_center": ""}.
Switch (right endpoint)
The current state of this switch is in the published state under the state_right property (value is ON or OFF).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_right": "ON"}, {"state_right": "OFF"} or {"state_right": "TOGGLE"}.
To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state_right": ""}.
Device_temperature (numeric)
Temperature of the device.
Value can be found in the published state on the device_temperature property.
It’s not possible to read (/get) or write (/set) this value.
The unit of this value is °C.
Linkquality (numeric)
Link quality (signal strength).
Value can be found in the published state on the linkquality property.
It’s not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 255.
The unit of this value is lqi.