Lidl HG08164

   
Model HG08164
Vendor Lidl
Description Silvercrest smart button
Exposes action, battery, linkquality
Picture Lidl HG08164

Notes

Pairing

  1. Remove the battery compartmet cover on the back of the device (you may need to use a flat-head screw driver).
  2. Press and hold the reset button for 6 seconds. The device enters pairing mode. The LED in the front blinks to indicate that.
  3. Pairing happens automatically if zigbee2mqtt is accepting new devices.

Battery value

If battery value is not showing in Zigbee2MQTT briefly pressing reset button AFTER device is fully paired usually resolves the issue.

Options

How to use device type specific configuration

  • simulated_brightness: Simulate a brightness value. If this device provides a brightness_move_up or brightness_move_down action it is possible to specify the update interval and delta. The action_brightness_delta indicates the delta for each interval. Example:
    simulated_brightness:
    delta: 20 # delta per interval, default = 20
    interval: 200 # interval in milliseconds, default = 200
    

Exposes

Action (enum)

Triggered action (e.g. a button click). Value can be found in the published state on the action property. It’s not possible to read (/get) or write (/set) this value. The possible values are: on, off, brightness_stop, brightness_step_up, brightness_step_down, single, double.

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported.. Value can be found in the published state on the battery property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.