Xiaomi CTP-R01

Model	CTP-R01
Vendor	Xiaomi
Description	Aqara magic cube T1 Pro
Exposes	battery, voltage, power_outage_count, operation_mode, side, action, action_from_side, action_angle, linkquality
Picture
White-label	Xiaomi MFCZQ12LM

Notes

Battery

Uses a CR2450 battery

Pairing

Remove the back plate by using the included tool or a wedge to click it off. Press and hold the LINK button inside the device for +- 5 seconds (until the blue light blinks three times). After this the device will automatically join, but the interview process may not finish. If that happens, keep doing short presses to the LINK button to keep the light flashing, until the interview process finishes successfully.

Mode Switch

There are two ways to toggle between scene mode and action mode:

1. Hard switch:

   Open lid, and click LINK 5 times in a row.

2. Soft switch (using Zigbee2MQTT frontend):

   Toggle operation_mode in the Exposes tab of the device in Zigbee2MQTT frontend. Change won’t happen right away, the device only responds to mode switch once an hour. But you can give the device a throw (a forceful shake action without backward motion), which, when done right, will force the device to respond. Otherwise you can open lid and click LINK button to have it respond immediately.

Supported Actions

• Scene mode:

  Action	additional attributes in payload
  rotate_left	action_angle
  rotate_right	action_angle
  shake	-
  throw	-
  hold	-
  side_up	side
  flip_to_side	side
  1_min_inactivity	-

• Action mode:

  Action	additional attributes in payload
  rotate_left	action_angle
  rotate_right	action_angle
  shake	-
  throw	-
  slide	side
  tap	side
  flip90	side, action_from_side
  flip180	side, action_from_side
  1_min_inactivity	-

OTA updates

This device supports OTA updates, for more information see OTA updates.

Exposes

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported.. Value can be found in the published state on the battery property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Voltage (numeric)

Voltage of the battery in millivolts. Value can be found in the published state on the voltage property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is mV.

Power_outage_count (numeric)

Number of power outages. Value can be found in the published state on the power_outage_count property. It’s not possible to read (/get) or write (/set) this value.

Operation_mode (enum)

Value will not be published in the state. It’s not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"operation_mode": NEW_VALUE}. The possible values are: action_mode, scene_mode.

Side (numeric)

Side of the cube. Value can be found in the published state on the side property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 6.

Action (enum)

Triggered action. Value can be found in the published state on the action property. It’s not possible to read (/get) or write (/set) this value. The possible values are: shake, throw, tap, slide, flip180, flip90, hold, side_up, rotate_left, rotate_right, 1_min_inactivity, flip_to_side.

Action_from_side (numeric)

Side of the cube. Value can be found in the published state on the action_from_side property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 6.

Action_angle (numeric)

Value can be found in the published state on the action_angle property. It’s not possible to read (/get) or write (/set) this value. The minimal value is -360 and the maximum value is 360. The unit of this value is °.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.