SMaBiT (Bitron Video) AV2010/22A

   
Model AV2010/22A
Vendor SMaBiT (Bitron Video)
Description Design motion detector
Exposes occupancy, battery_low, linkquality
Picture SMaBiT (Bitron Video) AV2010/22A

Notes

Pairing

Press and hold the function key on the top of the sensor for about 10 seconds until the red LED briefly lights up once. During the search, the LED lights up red once every 10 seconds. When the LED flashes 2 times, the device has successfully registered.

Options

How to use device type specific configuration

  • occupancy_timeout: Time in seconds after which occupancy is cleared after detecting it (default 90 seconds). The value must be a number with a minimum value of 0

Exposes

Occupancy (binary)

Indicates whether the device detected occupancy. Value can be found in the published state on the occupancy property. It’s not possible to read (/get) or write (/set) this value. If value equals true occupancy is ON, if false OFF.

Battery_low (binary)

Indicates if the battery of this device is almost empty. Value can be found in the published state on the battery_low property. It’s not possible to read (/get) or write (/set) this value. If value equals true battery_low is ON, if false OFF.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.