SMaBiT (Bitron Video) AV2010/14
| Model | AV2010/14 |
| Vendor | SMaBiT (Bitron Video) |
| Description | Curtain motion detector |
| Exposes | occupancy, battery_low, linkquality |
| Picture |  |
Notes
Pairing
Pair the SMaBiT AV2010/14 sensor to Zigbee2MQTT by holding it close to the coordinator and pressing the indicator light/button at the front for about 10 seconds. The indicator light/button will flash red once to indicate it is in pairing mode. The SMaBiT AV2010/22 sensor should now be visible in the Zigbee2MQTT Devices overview.
Options
How to use device type specific configuration
occupancy_timeout: Time in seconds after which occupancy is cleared after detecting it (default 90 seconds). The value must be a number with a minimum value of0
Exposes
Occupancy (binary)
Indicates whether the device detected occupancy.
Value can be found in the published state on the occupancy property.
It’s not possible to read (/get) or write (/set) this value.
If value equals true occupancy is ON, if false OFF.
Battery_low (binary)
Indicates if the battery of this device is almost empty.
Value can be found in the published state on the battery_low property.
It’s not possible to read (/get) or write (/set) this value.
If value equals true battery_low is ON, if false OFF.
Linkquality (numeric)
Link quality (signal strength).
Value can be found in the published state on the linkquality property.
It’s not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 255.
The unit of this value is lqi.