Datek 0402946

   
Model 0402946
Vendor Datek
Description Zigbee module for ID lock 150
Exposes lock (state, lock_state), battery, pin_code, action, action_source_name, action_user, sound_volume, master_pin_mode, rfid_enable, relock_enabled, lock_mode, service_mode, linkquality
Picture Datek 0402946

Notes

Pairing

If pairing failed, try the followings:

  • Make sure door are in open state
  • Press and hold manual lock button and wait for 3 beeps
  • Keypad in front lights up
  • Type inn the Master PIN, then *, then 2, then *, then 0 Lock will now reset the Zigbee module and go to pairing mode

PIN Code Usage

To retrieve the state, send a get message to the device topic (zigbee2mqtt/DEVICE_FRIENDLY_NAME/get) with the body {"pin_code":{"user":1}}. To set, send a set message to the device topic (zigbee2mqtt/DEVICE_FRIENDLY_NAME/set) with the body {"pin_code":{"user":1,"pin_code":1234}}. To clear a code, send a set message with the body {"pin_code":{"user":1}}

Manual

ID LOCK 150 user manual Zigbee module user manual

Where do I find this product

Product page

Options

How to use device type specific configuration

  • expose_pin: Expose pin of this lock in the published payload (default false). The value must be true or false

Exposes

Lock

The current state of this lock is in the published state under the state property (value is LOCK or UNLOCK). To control this lock publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "LOCK"} or {"state": "UNLOCK"}. To read the current state of this lock publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state": ""}. This lock exposes a lock state which can be found in the published state under the lock_state property. It’s not possible to read (/get) or write (/set) this value. The possible values are: not_fully_locked, locked, unlocked.

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported.. Value can be found in the published state on the battery property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Pin_code (composite)

Can be set by publishing to zigbee2mqtt/FRIENDLY_NAME/set with payload {"pin_code": {"user": VALUE, "user_type": VALUE, "user_enabled": VALUE, "pin_code": VALUE}} To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"pin_code": ""}.

  • user (numeric): User ID to set or clear the pincode for
  • user_type (enum): Type of user, unrestricted: owner (default), (year week)_day_schedule: user has ability to open lock based on specific time period, master: user has ability to both program and operate the door lock, non_access: user is recognized by the lock but does not have the ability to open the lock allowed values: unrestricted, year_day_schedule, week_day_schedule, master, non_access
  • user_enabled (binary): Whether the user is enabled/disabled allowed values: true or false
  • pin_code (numeric): Pincode to set, set pincode to null to clear

Action (enum)

Triggered action on the lock. Value can be found in the published state on the action property. It’s not possible to read (/get) or write (/set) this value. The possible values are: unknown, lock, unlock, lock_failure_invalid_pin_or_id, lock_failure_invalid_schedule, unlock_failure_invalid_pin_or_id, unlock_failure_invalid_schedule, one_touch_lock, key_lock, key_unlock, auto_lock, schedule_lock, schedule_unlock, manual_lock, manual_unlock, non_access_user_operational_event.

Action_source_name (enum)

Source of the triggered action on the lock. Value can be found in the published state on the action_source_name property. It’s not possible to read (/get) or write (/set) this value. The possible values are: keypad, rfid, manual, rf.

Action_user (numeric)

ID of user that triggered the action on the lock. Value can be found in the published state on the action_user property. It’s not possible to read (/get) or write (/set) this value.

Sound_volume (enum)

Sound volume of the lock. Value can be found in the published state on the sound_volume property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"sound_volume": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"sound_volume": NEW_VALUE}. The possible values are: silent_mode, low_volume, high_volume.

Master_pin_mode (binary)

Allow Master PIN Unlock. Value can be found in the published state on the master_pin_mode property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"master_pin_mode": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"master_pin_mode": NEW_VALUE}. If value equals true master_pin_mode is ON, if false OFF.

Rfid_enable (binary)

Allow RFID to Unlock. Value can be found in the published state on the rfid_enable property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"rfid_enable": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"rfid_enable": NEW_VALUE}. If value equals true rfid_enable is ON, if false OFF.

Relock_enabled (binary)

Allow Auto Re-Lock. Value can be found in the published state on the relock_enabled property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"relock_enabled": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"relock_enabled": NEW_VALUE}. If value equals true relock_enabled is ON, if false OFF.

Lock_mode (enum)

Lock-Mode of the Lock. Value can be found in the published state on the lock_mode property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"lock_mode": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"lock_mode": NEW_VALUE}. The possible values are: auto_off_away_off, auto_on_away_off, auto_off_away_on, auto_on_away_on.

Service_mode (enum)

Service Mode of the Lock. Value can be found in the published state on the service_mode property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"service_mode": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"service_mode": NEW_VALUE}. The possible values are: deactivated, random_pin_1x_use, random_pin_24_hours.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.